SD slot 0: Enable card detection

[z180-stamp.git] / avr / command_tbl.c

/*
 * (C) Copyright 2014 Leo C. <erbl259-lmu@yahoo.de>
 *
 * SPDX-License-Identifier:	GPL-2.0+
 */

#include "common.h"
#include "command.h"
#include "cmd_mem.h"

extern command_ret_t do_help(cmd_tbl_t *, int, int, char * const []);
extern command_ret_t do_echo(cmd_tbl_t *, int, int, char * const []);
extern command_ret_t do_sleep(cmd_tbl_t *, int, int, char * const []);
extern command_ret_t do_env_print(cmd_tbl_t *, int, int, char * const []);
extern command_ret_t do_env_default(cmd_tbl_t *, int, int, char * const []);
extern command_ret_t do_env_set(cmd_tbl_t *, int, int, char * const []);
extern command_ret_t do_env_save(cmd_tbl_t *, int, int, char * const []);
extern command_ret_t do_loadf(cmd_tbl_t *, int, int, char * const []);
extern command_ret_t do_go(cmd_tbl_t *, int, int, char * const []);
extern command_ret_t do_restart(cmd_tbl_t *, int, int, char * const []);
extern command_ret_t do_console(cmd_tbl_t *, int, int, char * const []);
extern command_ret_t do_dump_mem(cmd_tbl_t *, int, int, char * const []);
extern command_ret_t do_eep_cp(cmd_tbl_t *, int, int, char * const []);
extern command_ret_t do_busreq_pulse(cmd_tbl_t *, int, int, char * const []);
extern command_ret_t do_date(cmd_tbl_t *, int, int, char * const []);
extern command_ret_t do_gpio(cmd_tbl_t *, int, int, char * const []);
extern command_ret_t do_sd(cmd_tbl_t *, int, int, char * const []);
extern command_ret_t do_fat_stat(cmd_tbl_t *, int, int, char * const []);
extern command_ret_t do_fat_ls(cmd_tbl_t *, int, int, char * const []);
//extern command_ret_t do_fat_read(cmd_tbl_t *, int, int, char * const []);
//extern command_ret_t do_fat_write(cmd_tbl_t *, int, int, char * const []);
extern command_ret_t do_fat_rw(cmd_tbl_t *, int, int, char * const []);

#ifdef CONFIG_SYS_LONGHELP
const FLASH char sd_help_text[] =
	"bla \t- do bla\n"
	;
#endif /* CONFIG_SYS_LONGHELP */


cmd_tbl_t cmd_tbl[] = {

CMD_TBL_ITEM(
	date,	2,	1,	do_date,
	"get/set/reset date & time",
	"[MMDDhhmm[[CC]YY][.ss]]\ndate reset\n"
	"  - without arguments: print date & time\n"
	"  - with numeric argument: set the system date & time\n"
	"  - with 'reset' argument: reset the RTC"
),

#ifdef DEBUG

CMD_TBL_ITEM(
	!mdr,	3,	1,	do_dump_mem,
	"RAM dump",
	"address [count]"
),
CMD_TBL_ITEM(
	!mde,	3,	1,	do_dump_mem,
	"EEPROM dump",
	"address [count]"
),
CMD_TBL_ITEM(
	!cpe,	4,	0,	do_eep_cp,
	"EEPROM copy",
	"source target count"
),
#endif
CMD_TBL_ITEM(
	mstep,	2,	1,	do_busreq_pulse,
	"execute one M cycle",
	"[count]\n"
	"     - repeat count times"
),
CMD_TBL_ITEM(
	echo,	CONFIG_SYS_MAXARGS,	1,	do_echo,
	"echo args to console",
	"[args..]\n"
	"     - echo args to console; \\c suppresses newline"
),
CMD_TBL_ITEM(
	sleep ,    2,    1,     do_sleep,
	"delay execution for some time",
	"N[m][s]\n"
	"    - delay execution for decimal N (milli) seconds"
),
CMD_TBL_ITEM_COMPLETE(
	run,	CONFIG_SYS_MAXARGS,	1,	do_run,
	"run commands in an environment variable",
	"var [...]\n"
	"    - run the commands in the environment variable(s) 'var'",
	var_complete
),
CMD_TBL_ITEM_COMPLETE(
	printenv, CONFIG_SYS_MAXARGS,	1,	do_env_print,
	"print environment variables",
	"\n"
	"    - print values of all environment variables\n"
	"printenv name ...\n"
	"    - print value of environment variable 'name'",
	var_complete
),
CMD_TBL_ITEM_COMPLETE(
	setenv, CONFIG_SYS_MAXARGS,	0,	do_env_set,
	"set environment variables",
	"name value ...\n"
	"    - set environment variable 'name' to 'value ...'\n"
	"setenv name\n"
	"    - delete environment variable 'name'",
	var_complete
),
CMD_TBL_ITEM(
	saveenv,	1,	0,	do_env_save,
	"save environment variables to persistent storage",
	""
),
CMD_TBL_ITEM(
	defaultenv,	1,	0,	do_env_default,
	"set all environment variables to their default values",
	""
),

CMD_TBL_ITEM(
	loadf,	1,	0,	do_loadf,
	"load srec_cat prepared image from controller flash",
	""
),
CMD_TBL_ITEM(
	go,	2,	0,	do_go,
	"start application at address 'addr'",
	"addr\n"
	"    - start application at address 'addr'"
//	"\n"
//	"      passing 'arg' as arguments"
),
CMD_TBL_ITEM(
	reset,	1,	0,	do_reset,
	"Keep CPU in RESET state",
	""
),
CMD_TBL_ITEM(
	restart, 1, 1,	do_restart,
	"Perform RESET of the CPU",
	""
),
CMD_TBL_ITEM(
	connect, 1, 1,	do_console,
	"Connect to CPU console i/o",
	""
),

CMD_TBL_ITEM(
	pin, CONFIG_SYS_MAXARGS, 1,	do_gpio,
	"Set or query pin state",
	"[-s] [<pins>]\n"
	"    - print cofiguration and state or frequency of pins\n"
	"      print all pins, if argument is omitted\n"
	"pin <pins> h[igh]|l[ow]\n"
	"    - config pins as output and set to level high or low\n"
	"pin <pins> ts|i[n]|p[ullup]\n"
	"    - config pins as input/tristate or input with pullup\n"
	"pin <pins> value[K|M][Hz]\n"
	"    - output a clock on pins\n"
	"      value is system clock divider or frequency, if 'Hz' is appended\n"
	"      divider is rounded down to next possible value (depends on pin)\n"
	"\n"
	"<pins> is a comma separated list of numbers or ranges, i.e. \"0,9,3-6\"\n"
),

CMD_TBL_ITEM(
	md,	3,	1,	do_mem_md,
	"memory display",
	"address [# of objects]"
),
CMD_TBL_ITEM(
	mm,	2,	1,	do_mem_mm,
	"memory modify (auto-incrementing address)",
	"address"
),
CMD_TBL_ITEM(
	nm,	2,	1,	do_mem_nm,
	"memory modify (constant address)",
	"address"
),
CMD_TBL_ITEM(
	mw,	4,	1,	do_mem_mw,
	"memory write (fill)",
	"address value [count]"
),
CMD_TBL_ITEM(
	cp,	4,	1,	do_mem_cp,
	"memory copy",
	"source target count"
),
CMD_TBL_ITEM(
	cmp,	4,	1,	do_mem_cmp,
	"memory compare",
	"addr1 addr2 count"
),
CMD_TBL_ITEM(
	base,	2,	0,	do_mem_base,
	"print or set address offset",
	"\n"
	"    - print address offset for memory commands\n"
	"base offset\n"
	"    - set address offset for memory commands to 'offset'"
),
CMD_TBL_ITEM(
	loop,	3,	1,	do_mem_loop,
	"infinite loop on address range",
	"address number_of_bytes"
),
#ifdef CONFIG_LOOPW
CMD_TBL_ITEM(
	loopw,	4,	1,	do_mem_loopw,
	"infinite write loop on address range",
	"address number_of_bytes data_to_write"
),
#endif /* CONFIG_LOOPW */

#ifdef CONFIG_CMD_MEMTEST
CMD_TBL_ITEM(
	mtest,	5,	1,	do_mem_mtest,
	"simple RAM read/write test",
	"[start [end [pattern [iterations]]]]"
),
#endif	/* CONFIG_CMD_MEMTEST */

#ifdef CONFIG_MX_CYCLIC
CMD_TBL_ITEM(
	mdc,	4,	1,	do_mem_mdc,
	"memory display cyclic",
	"address count delay(ms)"
),
CMD_TBL_ITEM(
	mwc,	4,	1,	do_mem_mwc,
	"memory write cyclic",
	"address value delay(ms)"
),
#endif /* CONFIG_MX_CYCLIC */

CMD_TBL_ITEM(
	sd,   CONFIG_SYS_MAXARGS, 1, do_sd,
	"SD/MMC card handling commands",
	"<subcommand> args ...\n"
	"sd help\n"
	"    - print help on subcommands"
),

CMD_TBL_ITEM(
	fatstat,	2,	1,	do_fat_stat,
	"Show logical drive status",
	"dev"
),
CMD_TBL_ITEM(
	fatls,	2,	1,	do_fat_ls,
	"Directory listing",
	"path"
),
CMD_TBL_ITEM(
	fatload,	5,	0,	do_fat_rw,
	"load binary file from a dos filesystem",
	"<d:/path/filename> <addr> [bytes [pos]]\n"
	"    - Load binary file 'path/filename' on logical drive 'd'\n"
	"      to address 'addr' from dos filesystem.\n"
	"      'pos' gives the file position to start loading from.\n"
	"      If 'pos' is omitted, 0 is used. 'pos' requires 'bytes'.\n"
	"      'bytes' gives the size to load. If 'bytes' is 0 or omitted,\n"
	"      the load stops on end of file."
),
CMD_TBL_ITEM(
	fatwrite,	4,	0,	do_fat_rw,
	"write file into a dos filesystem",
	"<d:/path/filename> <addr> <bytes>\n"
	"    - Write file to 'path/filename' on logical drive 'd' from RAM\n"
	"      starting at address 'addr'. 'bytes' gives the size to load.\n"
	"      If 'bytes' is 0 or omitted, the load stops on end of file."
),

CMD_TBL_ITEM(
	help,	CONFIG_SYS_MAXARGS,	1,	do_help,
	"print command description/usage",
	"\n"
	"       - print brief description of all commands\n"
	"help command ...\n"
	"       - print detailed usage of 'command'"
),

/* This does not use the CMD_TBL_ITEM macro as ? can't be used in symbol names */
	{FSTR("?"),   CONFIG_SYS_MAXARGS, 1, do_help,
	 FSTR("alias for 'help'"),
#ifdef  CONFIG_SYS_LONGHELP
	FSTR(""),
#endif /* CONFIG_SYS_LONGHELP */
#ifdef CONFIG_AUTO_COMPLETE
	0,
#endif
},
/* Mark end of table */
{ 0 },
};