+/*---------------------------------------------------------------------------/
+/ FatFs - FAT file system module configuration file R0.10c (C)ChaN, 2014
+/---------------------------------------------------------------------------*/
-#undef _WORD_ACCESS
+#define _FFCONF 80376 /* Revision ID */
-#define _WORD_ACCESS 0 /* 0 or 1 */
+/*---------------------------------------------------------------------------/
+/ Functions and Buffer Configurations
+/---------------------------------------------------------------------------*/
+
+#define _FS_TINY 0
+/* This option switches tiny buffer configuration. (0:Normal or 1:Tiny)
+/ At the tiny configuration, size of the file object (FIL) is reduced _MAX_SS
+/ bytes. Instead of private sector buffer eliminated from the file object,
+/ common sector buffer in the file system object (FATFS) is used for the file
+/ data transfer. */
+
+
+#define _FS_READONLY 0
+/* This option switches read-only configuration. (0:Read/Write or 1:Read-only)
+/ Read-only configuration removes basic writing API functions, f_write(),
+/ f_sync(), f_unlink(), f_mkdir(), f_chmod(), f_rename(), f_truncate(),
+/ f_getfree() and optional writing functions as well. */
+
+
+#define _FS_MINIMIZE 0
+/* This option defines minimization level to remove some API functions.
+/
+/ 0: All basic functions are enabled.
+/ 1: f_stat(), f_getfree(), f_unlink(), f_mkdir(), f_chmod(), f_utime(),
+/ f_truncate() and f_rename() function are removed.
+/ 2: f_opendir(), f_readdir() and f_closedir() are removed in addition to 1.
+/ 3: f_lseek() function is removed in addition to 2. */
+
+
+#define _USE_STRFUNC 0
+/* This option switches string functions, f_gets(), f_putc(), f_puts() and
+/ f_printf().
+/
+/ 0: Disable string functions.
+/ 1: Enable without LF-CRLF conversion.
+/ 2: Enable with LF-CRLF conversion. */
+
+
+#define _USE_MKFS 0
+/* This option switches f_mkfs() function. (0:Disable or 1:Enable)
+/ To enable it, also _FS_READONLY need to be set to 0. */
+
+
+#define _USE_FASTSEEK 0
+/* This option switches fast seek feature. (0:Disable or 1:Enable) */
+
+
+#define _USE_LABEL 1
+/* This option switches volume label functions, f_getlabel() and f_setlabel().
+/ (0:Disable or 1:Enable) */
+
+
+#define _USE_FORWARD 0
+/* This option switches f_forward() function. (0:Disable or 1:Enable) */
+/* To enable it, also _FS_TINY need to be set to 1. */
+
+
+/*---------------------------------------------------------------------------/
+/ Locale and Namespace Configurations
+/---------------------------------------------------------------------------*/
+
+#define _CODE_PAGE 858
+/* This option specifies the OEM code page to be used on the target system.
+/ Incorrect setting of the code page can cause a file open failure.
+/
+/ 932 - Japanese Shift_JIS (DBCS, OEM, Windows)
+/ 936 - Simplified Chinese GBK (DBCS, OEM, Windows)
+/ 949 - Korean (DBCS, OEM, Windows)
+/ 950 - Traditional Chinese Big5 (DBCS, OEM, Windows)
+/ 1250 - Central Europe (Windows)
+/ 1251 - Cyrillic (Windows)
+/ 1252 - Latin 1 (Windows)
+/ 1253 - Greek (Windows)
+/ 1254 - Turkish (Windows)
+/ 1255 - Hebrew (Windows)
+/ 1256 - Arabic (Windows)
+/ 1257 - Baltic (Windows)
+/ 1258 - Vietnam (OEM, Windows)
+/ 437 - U.S. (OEM)
+/ 720 - Arabic (OEM)
+/ 737 - Greek (OEM)
+/ 775 - Baltic (OEM)
+/ 850 - Multilingual Latin 1 (OEM)
+/ 858 - Multilingual Latin 1 + Euro (OEM)
+/ 852 - Latin 2 (OEM)
+/ 855 - Cyrillic (OEM)
+/ 866 - Russian (OEM)
+/ 857 - Turkish (OEM)
+/ 862 - Hebrew (OEM)
+/ 874 - Thai (OEM, Windows)
+/ 1 - ASCII (No extended character. Valid for only non-LFN configuration.) */
+
+
+#define _USE_LFN 1
+#define _MAX_LFN 128
+/* The _USE_LFN option switches the LFN feature.
+/
+/ 0: Disable LFN feature. _MAX_LFN has no effect.
+/ 1: Enable LFN with static working buffer on the BSS. Always NOT thread-safe.
+/ 2: Enable LFN with dynamic working buffer on the STACK.
+/ 3: Enable LFN with dynamic working buffer on the HEAP.
+/
+/ When enable the LFN feature, Unicode handling functions (option/unicode.c) must
+/ be added to the project. The LFN working buffer occupies (_MAX_LFN + 1) * 2 bytes.
+/ When use stack for the working buffer, take care on stack overflow. When use heap
+/ memory for the working buffer, memory management functions, ff_memalloc() and
+/ ff_memfree(), must be added to the project. */
+
+
+#define _LFN_UNICODE 0
+/* This option switches character encoding on the API. (0:ANSI/OEM or 1:Unicode)
+/ To use Unicode string for the path name, enable LFN feature and set _LFN_UNICODE
+/ to 1. This option also affects behavior of string I/O functions. */
+
+
+#define _STRF_ENCODE 3
+/* When _LFN_UNICODE is 1, this option selects the character encoding on the file to
+/ be read/written via string I/O functions, f_gets(), f_putc(), f_puts and f_printf().
+/
+/ 0: ANSI/OEM
+/ 1: UTF-16LE
+/ 2: UTF-16BE
+/ 3: UTF-8
+/
+/ When _LFN_UNICODE is 0, this option has no effect. */
+
+
+#define _FS_RPATH 2
+/* This option configures relative path feature.
+/
+/ 0: Disable relative path feature and remove related functions.
+/ 1: Enable relative path feature. f_chdir() and f_chdrive() are available.
+/ 2: f_getcwd() function is available in addition to 1.
+/
+/ Note that directory items read via f_readdir() are affected by this option. */
+
+
+/*---------------------------------------------------------------------------/
+/ Drive/Volume Configurations
+/---------------------------------------------------------------------------*/
+
+#define _VOLUMES 2
+/* Number of volumes (logical drives) to be used. */
+
+
+#define _STR_VOLUME_ID 0
+#define _VOLUME_STRS "RAM","NAND","CF","SD1","SD2","USB1","USB2","USB3"
+/* _STR_VOLUME_ID option switches string volume ID feature.
+/ When _STR_VOLUME_ID is set to 1, also pre-defined strings can be used as drive
+/ number in the path name. _VOLUME_STRS defines the drive ID strings for each
+/ logical drives. Number of items must be equal to _VOLUMES. Valid characters for
+/ the drive ID strings are: A-Z and 0-9. */
+
+
+#define _MULTI_PARTITION 0
+/* This option switches multi-partition feature. By default (0), each logical drive
+/ number is bound to the same physical drive number and only an FAT volume found on
+/ the physical drive will be mounted. When multi-partition feature is enabled (1),
+/ each logical drive number is bound to arbitrary physical drive and partition
+/ listed in the VolToPart[]. Also f_fdisk() funciton will be enabled. */
+
+
+#define _MIN_SS 512
+#define _MAX_SS 512
+/* These options configure the range of sector size to be supported. (512, 1024,
+/ 2048 or 4096) Always set both 512 for most systems, all type of memory cards and
+/ harddisk. But a larger value may be required for on-board flash memory and some
+/ type of optical media. When _MAX_SS is larger than _MIN_SS, FatFs is configured
+/ to variable sector size and GET_SECTOR_SIZE command must be implemented to the
+/ disk_ioctl() function. */
+
+
+#define _USE_TRIM 0
+/* This option switches ATA-TRIM feature. (0:Disable or 1:Enable)
+/ To enable Trim feature, also CTRL_TRIM command should be implemented to the
+/ disk_ioctl() function. */
+
+
+#define _FS_NOFSINFO 0
+/* If you need to know correct free space on the FAT32 volume, set bit 0 of this
+/ option, and f_getfree() function at first time after volume mount will force
+/ a full FAT scan. Bit 1 controls the use of last allocated cluster number.
+/
+/ bit0=0: Use free cluster count in the FSINFO if available.
+/ bit0=1: Do not trust free cluster count in the FSINFO.
+/ bit1=0: Use last allocated cluster number in the FSINFO if available.
+/ bit1=1: Do not trust last allocated cluster number in the FSINFO.
+*/
+
+
+
+/*---------------------------------------------------------------------------/
+/ System Configurations
+/---------------------------------------------------------------------------*/
+
+#define _FS_NORTC 0
+#define _NORTC_MON 11
+#define _NORTC_MDAY 9
+#define _NORTC_YEAR 2014
+/* The _FS_NORTC option switches timestamp feature. If the system does not have
+/ an RTC function or valid timestamp is not needed, set _FS_NORTC to 1 to disable
+/ the timestamp feature. All objects modified by FatFs will have a fixed timestamp
+/ defined by _NORTC_MON, _NORTC_MDAY and _NORTC_YEAR.
+/ When timestamp feature is enabled (_FS_NORTC == 0), get_fattime() function need
+/ to be added to the project to read current time form RTC. _NORTC_MON,
+/ _NORTC_MDAY and _NORTC_YEAR have no effect.
+/ These options have no effect at read-only configuration (_FS_READONLY == 1). */
+
+
+#define _FS_LOCK 0
+/* The _FS_LOCK option switches file lock feature to control duplicated file open
+/ and illegal operation to open objects. This option must be 0 when _FS_READONLY
+/ is 1.
+/
+/ 0: Disable file lock feature. To avoid volume corruption, application program
+/ should avoid illegal open, remove and rename to the open objects.
+/ >0: Enable file lock feature. The value defines how many files/sub-directories
+/ can be opened simultaneously under file lock control. Note that the file
+/ lock feature is independent of re-entrancy. */
+
+
+#define _FS_REENTRANT 0
+#define _FS_TIMEOUT 1000
+#define _SYNC_t HANDLE
+/* The _FS_REENTRANT option switches the re-entrancy (thread safe) of the FatFs
+/ module itself. Note that regardless of this option, file access to different
+/ volume is always re-entrant and volume control functions, f_mount(), f_mkfs()
+/ and f_fdisk() function, are always not re-entrant. Only file/directory access
+/ to the same volume is under control of this feature.
+/
+/ 0: Disable re-entrancy. _FS_TIMEOUT and _SYNC_t have no effect.
+/ 1: Enable re-entrancy. Also user provided synchronization handlers,
+/ ff_req_grant(), ff_rel_grant(), ff_del_syncobj() and ff_cre_syncobj()
+/ function, must be added to the project. Samples are available in
+/ option/syscall.c.
+/
+/ The _FS_TIMEOUT defines timeout period in unit of time tick.
+/ The _SYNC_t defines O/S dependent sync object type. e.g. HANDLE, ID, OS_EVENT*,
+/ SemaphoreHandle_t and etc.. */
+
+
+#define _WORD_ACCESS 1 /* 0 or 1 */
/* The _WORD_ACCESS option is an only platform dependent option. It defines
/ which access method is used to the word data on the FAT volume.
/
projects / z180-stamp.git / blobdiff