include_rules
PROG = stamp-monitor
+
+FATFS = $(TOP)/fatfs/src/ff.c
+
SRC = main.c
SRC += cli.c cli_readline.c command.c command_tbl.c
SRC += cmd_help.c cmd_date.c cmd_mem.c cmd_boot.c cmd_gpio.c cmd_misc.c
SRC += env.c xmalloc.c date.c con-utils.c print-utils.c getopt-min.c
SRC += timer.c serial.c i2c.c pcf8583.c mmc.c
SRC += background.c z180-serv.c z80-if.c gpio.c
-SRC += $(TOP)/fatfs/src/ff.c
+SRC += $(FATFS) $(TOP)/fatfs/src/option/unicode.c
SRC_Z = ../z180/hdrom.c
CFLAGS += -fshort-enums
#CFLAGS += -fdiagnostics-color=always
-
#CFLAGS += -save-temps
+CFLAGS_$(FATFS) = -fno-strict-aliasing
CFLAGS += $(INCLUDES)
LDFLAGS += -Wl,--cref
-!cc = |> ^ CC %f^ $(CC) $(CFLAGS) $(CPPFLAGS) -c %f -o %o |> %B.o
+!cc = |> ^ CC %f^ $(CC) $(CFLAGS) $(CPPFLAGS) $(CFLAGS_%f) -c %f -o %o |> %B.o
!LINK = |> ^ LINK %o^ $(LD) $(CFLAGS) $(LDFLAGS) -Wl,-Map=%O.map %f $(LDLIBS) -o %o |> | %O.map
!OBJCOPY= |> ^ OBJCOPY %o^ $(OBJCOPY) -Oihex %f %o |>
!OBJDUMP= |> ^ OBJDUMP %o^ $(OBJDUMP) -h -S %f > %o |> %O.lss
#include "z80-if.h"
#include "print-utils.h"
#include "timer.h"
+#include "debug.h"
DWORD get_fattime (void)
/* Work register for fs command */
static DWORD AccSize;
static WORD AccFiles, AccDirs;
+#if _USE_LFN
+char Lfname[_MAX_LFN+1];
+FILINFO Finfo = {
+ .lfname = Lfname,
+ .lfsize = sizeof Lfname
+ };
+#else
FILINFO Finfo;
+#endif
static
FRESULT scan_files (
char *fn;
res = f_opendir(&dirs, path);
+
if (res == FR_OK) {
i = strlen(path);
while (((res = f_readdir(&dirs, &Finfo)) == FR_OK) && Finfo.fname[0]) {
command_ret_t do_fat_stat(cmd_tbl_t *cmdtp, int flag, int argc, char * const argv[])
{
FATFS FatFs, *fs;
- DWORD p1, p2;
+ DWORD clusters;
FRESULT res;
char buffer[512];
res = f_mount(&FatFs, argv[1], 0);
if (!res)
- res = f_getfree(argv[1], &p2, &fs);
+ res = f_getfree(argv[1], &clusters, &fs);
if (res) {
put_rc(res);
return CMD_RET_FAILURE;
#if _USE_LABEL
TCHAR label[12];
- res = f_getlabel(argv[1], label, &p1);
+ DWORD serial;
+ res = f_getlabel(argv[1], label, &serial);
if (res) {
put_rc(res);
return CMD_RET_FAILURE;
printf_P(PSTR(
"Volume name: %s\n"
"Volume S/N: %04X-%04X\n"),
- label, (WORD)((DWORD)p1 >> 16), (WORD)(p1 & 0xFFFF));
+ label, (WORD)(serial >> 16), (WORD)(serial & 0xFFFF));
#endif
my_puts_P(PSTR("\n..."));
AccSize = AccFiles = AccDirs = 0;
printf_P(PSTR("\r%u files, %lu bytes.\n%u folders.\n"
"%lu KB total disk space.\n%lu KB available.\n"),
AccFiles, AccSize, AccDirs,
- (fs->n_fatent - 2) * (fs->csize / 2), p2 * (fs->csize / 2)
+ (fs->n_fatent - 2) * (fs->csize / 2), clusters * (fs->csize / 2)
);
res = f_mount(NULL, argv[1], 0);
+++ /dev/null
-/*---------------------------------------------------------------------------/
-/ FatFs - FAT file system module configuration file R0.10c (C)ChaN, 2014
-/---------------------------------------------------------------------------*/
-
-#define _FFCONF 80376 /* Revision ID */
-
-/*---------------------------------------------------------------------------/
-/ Functions and Buffer Configurations
-/---------------------------------------------------------------------------*/
-
-#define _FS_TINY 0
-/* This option switches tiny buffer configuration. (0:Normal or 1:Tiny)
-/ At the tiny configuration, size of the file object (FIL) is reduced _MAX_SS
-/ bytes. Instead of private sector buffer eliminated from the file object,
-/ common sector buffer in the file system object (FATFS) is used for the file
-/ data transfer. */
-
-
-#define _FS_READONLY 0
-/* This option switches read-only configuration. (0:Read/Write or 1:Read-only)
-/ Read-only configuration removes basic writing API functions, f_write(),
-/ f_sync(), f_unlink(), f_mkdir(), f_chmod(), f_rename(), f_truncate(),
-/ f_getfree() and optional writing functions as well. */
-
-
-#define _FS_MINIMIZE 0
-/* This option defines minimization level to remove some API functions.
-/
-/ 0: All basic functions are enabled.
-/ 1: f_stat(), f_getfree(), f_unlink(), f_mkdir(), f_chmod(), f_utime(),
-/ f_truncate() and f_rename() function are removed.
-/ 2: f_opendir(), f_readdir() and f_closedir() are removed in addition to 1.
-/ 3: f_lseek() function is removed in addition to 2. */
-
-
-#define _USE_STRFUNC 0
-/* This option switches string functions, f_gets(), f_putc(), f_puts() and
-/ f_printf().
-/
-/ 0: Disable string functions.
-/ 1: Enable without LF-CRLF conversion.
-/ 2: Enable with LF-CRLF conversion. */
-
-
-#define _USE_MKFS 0
-/* This option switches f_mkfs() function. (0:Disable or 1:Enable)
-/ To enable it, also _FS_READONLY need to be set to 0. */
-
-
-#define _USE_FASTSEEK 0
-/* This option switches fast seek feature. (0:Disable or 1:Enable) */
-
-
-#define _USE_LABEL 1
-/* This option switches volume label functions, f_getlabel() and f_setlabel().
-/ (0:Disable or 1:Enable) */
-
-
-#define _USE_FORWARD 0
-/* This option switches f_forward() function. (0:Disable or 1:Enable) */
-/* To enable it, also _FS_TINY need to be set to 1. */
-
-
-/*---------------------------------------------------------------------------/
-/ Locale and Namespace Configurations
-/---------------------------------------------------------------------------*/
-
-#define _CODE_PAGE 858
-/* This option specifies the OEM code page to be used on the target system.
-/ Incorrect setting of the code page can cause a file open failure.
-/
-/ 932 - Japanese Shift_JIS (DBCS, OEM, Windows)
-/ 936 - Simplified Chinese GBK (DBCS, OEM, Windows)
-/ 949 - Korean (DBCS, OEM, Windows)
-/ 950 - Traditional Chinese Big5 (DBCS, OEM, Windows)
-/ 1250 - Central Europe (Windows)
-/ 1251 - Cyrillic (Windows)
-/ 1252 - Latin 1 (Windows)
-/ 1253 - Greek (Windows)
-/ 1254 - Turkish (Windows)
-/ 1255 - Hebrew (Windows)
-/ 1256 - Arabic (Windows)
-/ 1257 - Baltic (Windows)
-/ 1258 - Vietnam (OEM, Windows)
-/ 437 - U.S. (OEM)
-/ 720 - Arabic (OEM)
-/ 737 - Greek (OEM)
-/ 775 - Baltic (OEM)
-/ 850 - Multilingual Latin 1 (OEM)
-/ 858 - Multilingual Latin 1 + Euro (OEM)
-/ 852 - Latin 2 (OEM)
-/ 855 - Cyrillic (OEM)
-/ 866 - Russian (OEM)
-/ 857 - Turkish (OEM)
-/ 862 - Hebrew (OEM)
-/ 874 - Thai (OEM, Windows)
-/ 1 - ASCII (No extended character. Valid for only non-LFN configuration.) */
-
-
-#define _USE_LFN 0
-#define _MAX_LFN 128
-/* The _USE_LFN option switches the LFN feature.
-/
-/ 0: Disable LFN feature. _MAX_LFN has no effect.
-/ 1: Enable LFN with static working buffer on the BSS. Always NOT thread-safe.
-/ 2: Enable LFN with dynamic working buffer on the STACK.
-/ 3: Enable LFN with dynamic working buffer on the HEAP.
-/
-/ When enable the LFN feature, Unicode handling functions (option/unicode.c) must
-/ be added to the project. The LFN working buffer occupies (_MAX_LFN + 1) * 2 bytes.
-/ When use stack for the working buffer, take care on stack overflow. When use heap
-/ memory for the working buffer, memory management functions, ff_memalloc() and
-/ ff_memfree(), must be added to the project. */
-
-
-#define _LFN_UNICODE 0
-/* This option switches character encoding on the API. (0:ANSI/OEM or 1:Unicode)
-/ To use Unicode string for the path name, enable LFN feature and set _LFN_UNICODE
-/ to 1. This option also affects behavior of string I/O functions. */
-
-
-#define _STRF_ENCODE 3
-/* When _LFN_UNICODE is 1, this option selects the character encoding on the file to
-/ be read/written via string I/O functions, f_gets(), f_putc(), f_puts and f_printf().
-/
-/ 0: ANSI/OEM
-/ 1: UTF-16LE
-/ 2: UTF-16BE
-/ 3: UTF-8
-/
-/ When _LFN_UNICODE is 0, this option has no effect. */
-
-
-#define _FS_RPATH 2
-/* This option configures relative path feature.
-/
-/ 0: Disable relative path feature and remove related functions.
-/ 1: Enable relative path feature. f_chdir() and f_chdrive() are available.
-/ 2: f_getcwd() function is available in addition to 1.
-/
-/ Note that directory items read via f_readdir() are affected by this option. */
-
-
-/*---------------------------------------------------------------------------/
-/ Drive/Volume Configurations
-/---------------------------------------------------------------------------*/
-
-#define _VOLUMES 2
-/* Number of volumes (logical drives) to be used. */
-
-
-#define _STR_VOLUME_ID 0
-#define _VOLUME_STRS "RAM","NAND","CF","SD1","SD2","USB1","USB2","USB3"
-/* _STR_VOLUME_ID option switches string volume ID feature.
-/ When _STR_VOLUME_ID is set to 1, also pre-defined strings can be used as drive
-/ number in the path name. _VOLUME_STRS defines the drive ID strings for each
-/ logical drives. Number of items must be equal to _VOLUMES. Valid characters for
-/ the drive ID strings are: A-Z and 0-9. */
-
-
-#define _MULTI_PARTITION 0
-/* This option switches multi-partition feature. By default (0), each logical drive
-/ number is bound to the same physical drive number and only an FAT volume found on
-/ the physical drive will be mounted. When multi-partition feature is enabled (1),
-/ each logical drive number is bound to arbitrary physical drive and partition
-/ listed in the VolToPart[]. Also f_fdisk() funciton will be enabled. */
-
-
-#define _MIN_SS 512
-#define _MAX_SS 512
-/* These options configure the range of sector size to be supported. (512, 1024,
-/ 2048 or 4096) Always set both 512 for most systems, all type of memory cards and
-/ harddisk. But a larger value may be required for on-board flash memory and some
-/ type of optical media. When _MAX_SS is larger than _MIN_SS, FatFs is configured
-/ to variable sector size and GET_SECTOR_SIZE command must be implemented to the
-/ disk_ioctl() function. */
-
-
-#define _USE_TRIM 0
-/* This option switches ATA-TRIM feature. (0:Disable or 1:Enable)
-/ To enable Trim feature, also CTRL_TRIM command should be implemented to the
-/ disk_ioctl() function. */
-
-
-#define _FS_NOFSINFO 0
-/* If you need to know correct free space on the FAT32 volume, set bit 0 of this
-/ option, and f_getfree() function at first time after volume mount will force
-/ a full FAT scan. Bit 1 controls the use of last allocated cluster number.
-/
-/ bit0=0: Use free cluster count in the FSINFO if available.
-/ bit0=1: Do not trust free cluster count in the FSINFO.
-/ bit1=0: Use last allocated cluster number in the FSINFO if available.
-/ bit1=1: Do not trust last allocated cluster number in the FSINFO.
-*/
-
-
-
-/*---------------------------------------------------------------------------/
-/ System Configurations
-/---------------------------------------------------------------------------*/
-
-#define _FS_NORTC 0
-#define _NORTC_MON 11
-#define _NORTC_MDAY 9
-#define _NORTC_YEAR 2014
-/* The _FS_NORTC option switches timestamp feature. If the system does not have
-/ an RTC function or valid timestamp is not needed, set _FS_NORTC to 1 to disable
-/ the timestamp feature. All objects modified by FatFs will have a fixed timestamp
-/ defined by _NORTC_MON, _NORTC_MDAY and _NORTC_YEAR.
-/ When timestamp feature is enabled (_FS_NORTC == 0), get_fattime() function need
-/ to be added to the project to read current time form RTC. _NORTC_MON,
-/ _NORTC_MDAY and _NORTC_YEAR have no effect.
-/ These options have no effect at read-only configuration (_FS_READONLY == 1). */
-
-
-#define _FS_LOCK 0
-/* The _FS_LOCK option switches file lock feature to control duplicated file open
-/ and illegal operation to open objects. This option must be 0 when _FS_READONLY
-/ is 1.
-/
-/ 0: Disable file lock feature. To avoid volume corruption, application program
-/ should avoid illegal open, remove and rename to the open objects.
-/ >0: Enable file lock feature. The value defines how many files/sub-directories
-/ can be opened simultaneously under file lock control. Note that the file
-/ lock feature is independent of re-entrancy. */
-
-
-#define _FS_REENTRANT 0
-#define _FS_TIMEOUT 1000
-#define _SYNC_t HANDLE
-/* The _FS_REENTRANT option switches the re-entrancy (thread safe) of the FatFs
-/ module itself. Note that regardless of this option, file access to different
-/ volume is always re-entrant and volume control functions, f_mount(), f_mkfs()
-/ and f_fdisk() function, are always not re-entrant. Only file/directory access
-/ to the same volume is under control of this feature.
-/
-/ 0: Disable re-entrancy. _FS_TIMEOUT and _SYNC_t have no effect.
-/ 1: Enable re-entrancy. Also user provided synchronization handlers,
-/ ff_req_grant(), ff_rel_grant(), ff_del_syncobj() and ff_cre_syncobj()
-/ function, must be added to the project. Samples are available in
-/ option/syscall.c.
-/
-/ The _FS_TIMEOUT defines timeout period in unit of time tick.
-/ The _SYNC_t defines O/S dependent sync object type. e.g. HANDLE, ID, OS_EVENT*,
-/ SemaphoreHandle_t and etc.. */
-
-
-#define _WORD_ACCESS 1 /* 0 or 1 */
-/* The _WORD_ACCESS option is an only platform dependent option. It defines
-/ which access method is used to the word data on the FAT volume.
-/
-/ 0: Byte-by-byte access. Always compatible with all platforms.
-/ 1: Word access. Do not choose this unless under both the following conditions.
-/
-/ * Address misaligned memory access is always allowed to ALL instructions.
-/ * Byte order on the memory is little-endian.
-/
-/ If it is the case, _WORD_ACCESS can also be set to 1 to reduce code size.
-/ Following table shows allowable settings of some processor types.
-/
-/ ARM7TDMI 0 ColdFire 0 V850E 0
-/ Cortex-M3 0 Z80 0/1 V850ES 0/1
-/ Cortex-M0 0 x86 0/1 TLCS-870 0/1
-/ AVR 0/1 RX600(LE) 0/1 TLCS-900 0/1
-/ AVR32 0 RL78 0 R32C 0
-/ PIC18 0/1 SH-2 0 M16C 0/1
-/ PIC24 0 H8S 0 MSP430 0
-/ PIC32 0 H8/300H 0 8051 0/1
-*/
+/*---------------------------------------------------------------------------/
+/ FatFs - FAT file system module configuration file R0.10c (C)ChaN, 2014
+/---------------------------------------------------------------------------*/
-#undef _WORD_ACCESS
+#define _FFCONF 80376 /* Revision ID */
-#define _WORD_ACCESS 0 /* 0 or 1 */
+/*---------------------------------------------------------------------------/
+/ Functions and Buffer Configurations
+/---------------------------------------------------------------------------*/
+
+#define _FS_TINY 0
+/* This option switches tiny buffer configuration. (0:Normal or 1:Tiny)
+/ At the tiny configuration, size of the file object (FIL) is reduced _MAX_SS
+/ bytes. Instead of private sector buffer eliminated from the file object,
+/ common sector buffer in the file system object (FATFS) is used for the file
+/ data transfer. */
+
+
+#define _FS_READONLY 0
+/* This option switches read-only configuration. (0:Read/Write or 1:Read-only)
+/ Read-only configuration removes basic writing API functions, f_write(),
+/ f_sync(), f_unlink(), f_mkdir(), f_chmod(), f_rename(), f_truncate(),
+/ f_getfree() and optional writing functions as well. */
+
+
+#define _FS_MINIMIZE 0
+/* This option defines minimization level to remove some API functions.
+/
+/ 0: All basic functions are enabled.
+/ 1: f_stat(), f_getfree(), f_unlink(), f_mkdir(), f_chmod(), f_utime(),
+/ f_truncate() and f_rename() function are removed.
+/ 2: f_opendir(), f_readdir() and f_closedir() are removed in addition to 1.
+/ 3: f_lseek() function is removed in addition to 2. */
+
+
+#define _USE_STRFUNC 0
+/* This option switches string functions, f_gets(), f_putc(), f_puts() and
+/ f_printf().
+/
+/ 0: Disable string functions.
+/ 1: Enable without LF-CRLF conversion.
+/ 2: Enable with LF-CRLF conversion. */
+
+
+#define _USE_MKFS 0
+/* This option switches f_mkfs() function. (0:Disable or 1:Enable)
+/ To enable it, also _FS_READONLY need to be set to 0. */
+
+
+#define _USE_FASTSEEK 0
+/* This option switches fast seek feature. (0:Disable or 1:Enable) */
+
+
+#define _USE_LABEL 1
+/* This option switches volume label functions, f_getlabel() and f_setlabel().
+/ (0:Disable or 1:Enable) */
+
+
+#define _USE_FORWARD 0
+/* This option switches f_forward() function. (0:Disable or 1:Enable) */
+/* To enable it, also _FS_TINY need to be set to 1. */
+
+
+/*---------------------------------------------------------------------------/
+/ Locale and Namespace Configurations
+/---------------------------------------------------------------------------*/
+
+#define _CODE_PAGE 858
+/* This option specifies the OEM code page to be used on the target system.
+/ Incorrect setting of the code page can cause a file open failure.
+/
+/ 932 - Japanese Shift_JIS (DBCS, OEM, Windows)
+/ 936 - Simplified Chinese GBK (DBCS, OEM, Windows)
+/ 949 - Korean (DBCS, OEM, Windows)
+/ 950 - Traditional Chinese Big5 (DBCS, OEM, Windows)
+/ 1250 - Central Europe (Windows)
+/ 1251 - Cyrillic (Windows)
+/ 1252 - Latin 1 (Windows)
+/ 1253 - Greek (Windows)
+/ 1254 - Turkish (Windows)
+/ 1255 - Hebrew (Windows)
+/ 1256 - Arabic (Windows)
+/ 1257 - Baltic (Windows)
+/ 1258 - Vietnam (OEM, Windows)
+/ 437 - U.S. (OEM)
+/ 720 - Arabic (OEM)
+/ 737 - Greek (OEM)
+/ 775 - Baltic (OEM)
+/ 850 - Multilingual Latin 1 (OEM)
+/ 858 - Multilingual Latin 1 + Euro (OEM)
+/ 852 - Latin 2 (OEM)
+/ 855 - Cyrillic (OEM)
+/ 866 - Russian (OEM)
+/ 857 - Turkish (OEM)
+/ 862 - Hebrew (OEM)
+/ 874 - Thai (OEM, Windows)
+/ 1 - ASCII (No extended character. Valid for only non-LFN configuration.) */
+
+
+#define _USE_LFN 1
+#define _MAX_LFN 128
+/* The _USE_LFN option switches the LFN feature.
+/
+/ 0: Disable LFN feature. _MAX_LFN has no effect.
+/ 1: Enable LFN with static working buffer on the BSS. Always NOT thread-safe.
+/ 2: Enable LFN with dynamic working buffer on the STACK.
+/ 3: Enable LFN with dynamic working buffer on the HEAP.
+/
+/ When enable the LFN feature, Unicode handling functions (option/unicode.c) must
+/ be added to the project. The LFN working buffer occupies (_MAX_LFN + 1) * 2 bytes.
+/ When use stack for the working buffer, take care on stack overflow. When use heap
+/ memory for the working buffer, memory management functions, ff_memalloc() and
+/ ff_memfree(), must be added to the project. */
+
+
+#define _LFN_UNICODE 0
+/* This option switches character encoding on the API. (0:ANSI/OEM or 1:Unicode)
+/ To use Unicode string for the path name, enable LFN feature and set _LFN_UNICODE
+/ to 1. This option also affects behavior of string I/O functions. */
+
+
+#define _STRF_ENCODE 3
+/* When _LFN_UNICODE is 1, this option selects the character encoding on the file to
+/ be read/written via string I/O functions, f_gets(), f_putc(), f_puts and f_printf().
+/
+/ 0: ANSI/OEM
+/ 1: UTF-16LE
+/ 2: UTF-16BE
+/ 3: UTF-8
+/
+/ When _LFN_UNICODE is 0, this option has no effect. */
+
+
+#define _FS_RPATH 2
+/* This option configures relative path feature.
+/
+/ 0: Disable relative path feature and remove related functions.
+/ 1: Enable relative path feature. f_chdir() and f_chdrive() are available.
+/ 2: f_getcwd() function is available in addition to 1.
+/
+/ Note that directory items read via f_readdir() are affected by this option. */
+
+
+/*---------------------------------------------------------------------------/
+/ Drive/Volume Configurations
+/---------------------------------------------------------------------------*/
+
+#define _VOLUMES 2
+/* Number of volumes (logical drives) to be used. */
+
+
+#define _STR_VOLUME_ID 0
+#define _VOLUME_STRS "RAM","NAND","CF","SD1","SD2","USB1","USB2","USB3"
+/* _STR_VOLUME_ID option switches string volume ID feature.
+/ When _STR_VOLUME_ID is set to 1, also pre-defined strings can be used as drive
+/ number in the path name. _VOLUME_STRS defines the drive ID strings for each
+/ logical drives. Number of items must be equal to _VOLUMES. Valid characters for
+/ the drive ID strings are: A-Z and 0-9. */
+
+
+#define _MULTI_PARTITION 0
+/* This option switches multi-partition feature. By default (0), each logical drive
+/ number is bound to the same physical drive number and only an FAT volume found on
+/ the physical drive will be mounted. When multi-partition feature is enabled (1),
+/ each logical drive number is bound to arbitrary physical drive and partition
+/ listed in the VolToPart[]. Also f_fdisk() funciton will be enabled. */
+
+
+#define _MIN_SS 512
+#define _MAX_SS 512
+/* These options configure the range of sector size to be supported. (512, 1024,
+/ 2048 or 4096) Always set both 512 for most systems, all type of memory cards and
+/ harddisk. But a larger value may be required for on-board flash memory and some
+/ type of optical media. When _MAX_SS is larger than _MIN_SS, FatFs is configured
+/ to variable sector size and GET_SECTOR_SIZE command must be implemented to the
+/ disk_ioctl() function. */
+
+
+#define _USE_TRIM 0
+/* This option switches ATA-TRIM feature. (0:Disable or 1:Enable)
+/ To enable Trim feature, also CTRL_TRIM command should be implemented to the
+/ disk_ioctl() function. */
+
+
+#define _FS_NOFSINFO 0
+/* If you need to know correct free space on the FAT32 volume, set bit 0 of this
+/ option, and f_getfree() function at first time after volume mount will force
+/ a full FAT scan. Bit 1 controls the use of last allocated cluster number.
+/
+/ bit0=0: Use free cluster count in the FSINFO if available.
+/ bit0=1: Do not trust free cluster count in the FSINFO.
+/ bit1=0: Use last allocated cluster number in the FSINFO if available.
+/ bit1=1: Do not trust last allocated cluster number in the FSINFO.
+*/
+
+
+
+/*---------------------------------------------------------------------------/
+/ System Configurations
+/---------------------------------------------------------------------------*/
+
+#define _FS_NORTC 0
+#define _NORTC_MON 11
+#define _NORTC_MDAY 9
+#define _NORTC_YEAR 2014
+/* The _FS_NORTC option switches timestamp feature. If the system does not have
+/ an RTC function or valid timestamp is not needed, set _FS_NORTC to 1 to disable
+/ the timestamp feature. All objects modified by FatFs will have a fixed timestamp
+/ defined by _NORTC_MON, _NORTC_MDAY and _NORTC_YEAR.
+/ When timestamp feature is enabled (_FS_NORTC == 0), get_fattime() function need
+/ to be added to the project to read current time form RTC. _NORTC_MON,
+/ _NORTC_MDAY and _NORTC_YEAR have no effect.
+/ These options have no effect at read-only configuration (_FS_READONLY == 1). */
+
+
+#define _FS_LOCK 0
+/* The _FS_LOCK option switches file lock feature to control duplicated file open
+/ and illegal operation to open objects. This option must be 0 when _FS_READONLY
+/ is 1.
+/
+/ 0: Disable file lock feature. To avoid volume corruption, application program
+/ should avoid illegal open, remove and rename to the open objects.
+/ >0: Enable file lock feature. The value defines how many files/sub-directories
+/ can be opened simultaneously under file lock control. Note that the file
+/ lock feature is independent of re-entrancy. */
+
+
+#define _FS_REENTRANT 0
+#define _FS_TIMEOUT 1000
+#define _SYNC_t HANDLE
+/* The _FS_REENTRANT option switches the re-entrancy (thread safe) of the FatFs
+/ module itself. Note that regardless of this option, file access to different
+/ volume is always re-entrant and volume control functions, f_mount(), f_mkfs()
+/ and f_fdisk() function, are always not re-entrant. Only file/directory access
+/ to the same volume is under control of this feature.
+/
+/ 0: Disable re-entrancy. _FS_TIMEOUT and _SYNC_t have no effect.
+/ 1: Enable re-entrancy. Also user provided synchronization handlers,
+/ ff_req_grant(), ff_rel_grant(), ff_del_syncobj() and ff_cre_syncobj()
+/ function, must be added to the project. Samples are available in
+/ option/syscall.c.
+/
+/ The _FS_TIMEOUT defines timeout period in unit of time tick.
+/ The _SYNC_t defines O/S dependent sync object type. e.g. HANDLE, ID, OS_EVENT*,
+/ SemaphoreHandle_t and etc.. */
+
+
+#define _WORD_ACCESS 1 /* 0 or 1 */
/* The _WORD_ACCESS option is an only platform dependent option. It defines
/ which access method is used to the word data on the FAT volume.
/
+++ /dev/null
-#include "../fatfs/src/ff.h"
-#include "avr/ffconf.h"
--- /dev/null
+../fatfs/src/ff.h
\ No newline at end of file
--- /dev/null
+#ifdef __AVR__
+#include "avr/ffconf.h"
+#else
+#endif
projects / z180-stamp.git / commitdiff