avr/command_tbl.c

   1 /*
   2  * (C) Copyright 2014 Leo C. <erbl259-lmu@yahoo.de>
   3  *
   4  * SPDX-License-Identifier:     GPL-2.0+
   5  */
   6
   7 #include "common.h"
   8 #include "command.h"
   9 #include "cmd_mem.h"
  10
  11 extern command_ret_t do_help(cmd_tbl_t *, int, int, char * const []);
  12 extern command_ret_t do_echo(cmd_tbl_t *, int, int, char * const []);
  13 extern command_ret_t do_sleep(cmd_tbl_t *, int, int, char * const []);
  14 extern command_ret_t do_env_print(cmd_tbl_t *, int, int, char * const []);
  15 extern command_ret_t do_env_default(cmd_tbl_t *, int, int, char * const []);
  16 extern command_ret_t do_env_set(cmd_tbl_t *, int, int, char * const []);
  17 extern command_ret_t do_env_save(cmd_tbl_t *, int, int, char * const []);
  18 extern command_ret_t do_loadf(cmd_tbl_t *, int, int, char * const []);
  19 extern command_ret_t do_loadcpm3(cmd_tbl_t *, int, int, char * const []);
  20 extern command_ret_t do_loadihex(cmd_tbl_t *, int, int, char * const []);
  21 #if defined(CONFIG_CMD_LOADB)
  22 extern command_ret_t do_load_serial_bin(cmd_tbl_t *, int, int, char * const []);
  23 #endif
  24 extern command_ret_t do_go(cmd_tbl_t *, int, int, char * const []);
  25 extern command_ret_t do_restart(cmd_tbl_t *, int, int, char * const []);
  26 extern command_ret_t do_console(cmd_tbl_t *, int, int, char * const []);
  27 extern command_ret_t do_dump_mem(cmd_tbl_t *, int, int, char * const []);
  28 extern command_ret_t do_mem_mm_avr(cmd_tbl_t *, int, int, char * const []);
  29 extern command_ret_t do_mem_nm_avr(cmd_tbl_t *, int, int, char * const []);
  30 extern command_ret_t do_eep_cp(cmd_tbl_t *, int, int, char * const []);
  31 extern command_ret_t do_busreq_pulse(cmd_tbl_t *, int, int, char * const []);
  32 extern command_ret_t do_date(cmd_tbl_t *, int, int, char * const []);
  33 extern command_ret_t do_gpio(cmd_tbl_t *, int, int, char * const []);
  34 extern command_ret_t do_sd(cmd_tbl_t *, int, int, char * const []);
  35 extern command_ret_t do_fat_stat(cmd_tbl_t *, int, int, char * const []);
  36 extern command_ret_t do_fat_ls(cmd_tbl_t *, int, int, char * const []);
  37 //extern command_ret_t do_fat_read(cmd_tbl_t *, int, int, char * const []);
  38 //extern command_ret_t do_fat_write(cmd_tbl_t *, int, int, char * const []);
  39 extern command_ret_t do_fat_rw(cmd_tbl_t *, int, int, char * const []);
  40
  41 #ifdef CONFIG_SYS_LONGHELP
  42 const FLASH char sd_help_text[] =
  43         "bla \t- do bla\n"
  44         ;
  45 #endif /* CONFIG_SYS_LONGHELP */
  46
  47
  48 cmd_tbl_t cmd_tbl[] = {
  49
  50 CMD_TBL_ITEM(
  51         date,   2,      1,      do_date,
  52         "get/set date & time",
  53         "[MMDDhhmm[[CC]YY][.ss]]\ndate reset\n"
  54         "  - without arguments: print date & time\n"
  55         "  - with numeric argument: set the system date & time\n"
  56 ),
  57
  58 #ifdef DEBUG
  59
  60 CMD_TBL_ITEM(
  61         !mdr,   3,      1,      do_dump_mem,
  62         "RAM dump",
  63         "address [count]"
  64 ),
  65 CMD_TBL_ITEM(
  66         !mde,   3,      1,      do_dump_mem,
  67         "EEPROM dump",
  68         "address [count]"
  69 ),
  70 CMD_TBL_ITEM(
  71         !mdf,   3,      1,      do_dump_mem,
  72         "FLASH dump",
  73         "address [count]"
  74 ),
  75 CMD_TBL_ITEM(
  76         !cpe,   4,      0,      do_eep_cp,
  77         "EEPROM copy",
  78         "source target count"
  79 ),
  80 CMD_TBL_ITEM(
  81         !mm,    2,      1,      do_mem_mm_avr,
  82         "avr memory modify (auto-incrementing address)",
  83         "address"
  84 ),
  85 CMD_TBL_ITEM(
  86         !nm,    2,      1,      do_mem_nm_avr,
  87         "avr memory modify (constant address)",
  88         "address"
  89 ),
  90 #endif
  91 CMD_TBL_ITEM(
  92         mstep,  2,      1,      do_busreq_pulse,
  93         "execute one M cycle",
  94         "[count]\n"
  95         "     - repeat count times"
  96 ),
  97 CMD_TBL_ITEM(
  98         echo,   CONFIG_SYS_MAXARGS,     1,      do_echo,
  99         "display a line of text",
 100         "[-n] [argument ...]\n"
 101         "     - echo the argument(s) to console.\n"
 102         "       -n  do not output the trailing newline"
 103 ),
 104 CMD_TBL_ITEM(
 105         sleep ,    2,    1,     do_sleep,
 106         "delay execution for some time",
 107         "N[m][s]\n"
 108         "    - delay execution for decimal N (milli) seconds"
 109 ),
 110 CMD_TBL_ITEM_COMPLETE(
 111         run,    CONFIG_SYS_MAXARGS,     1,      do_run,
 112         "run commands in an environment variable",
 113         "var [...]\n"
 114         "    - run the commands in the environment variable(s) 'var'",
 115         var_complete
 116 ),
 117 CMD_TBL_ITEM_COMPLETE(
 118         printenv, CONFIG_SYS_MAXARGS,   1,      do_env_print,
 119         "print environment variables",
 120         "\n"
 121         "    - print values of all environment variables\n"
 122         "printenv name ...\n"
 123         "    - print value of environment variable 'name'",
 124         var_complete
 125 ),
 126 CMD_TBL_ITEM_COMPLETE(
 127         setenv, CONFIG_SYS_MAXARGS,     0,      do_env_set,
 128         "set environment variables",
 129         "name value ...\n"
 130         "    - set environment variable 'name' to 'value ...'\n"
 131         "setenv name\n"
 132         "    - delete environment variable 'name'",
 133         var_complete
 134 ),
 135 CMD_TBL_ITEM(
 136         saveenv,        1,      0,      do_env_save,
 137         "save environment variables to persistent storage",
 138         ""
 139 ),
 140 CMD_TBL_ITEM(
 141         defaultenv,     1,      0,      do_env_default,
 142         "set all environment variables to their default values",
 143         ""
 144 ),
 145
 146 CMD_TBL_ITEM(
 147         loadf,  1,      0,      do_loadf,
 148         "load srec_cat prepared image from controller flash",
 149         ""
 150 ),
 151 CMD_TBL_ITEM(
 152         loadcpm3, 3,    0,      do_loadcpm3,
 153         "load CPM3.SYS file",
 154         "[offset] [filename]\n"
 155         "    - Load CP/M 3 system file from FAT filesystem. This command makes\n"
 156         "      CPMLDR superfluous. Default filename is '"CONFIG_PATH_CPM3SYS"', but\n"
 157         "      uses environment variable '"ENV_PATH_CPM3SYS"', if set."
 158 ),
 159 CMD_TBL_ITEM(
 160         loadi,  2,      0,      do_loadihex,
 161         "load intel hex file over serial line",
 162         "[[-]offset]\n"
 163         "    - load Intel-Hex-Record file over serial line with offset 'offset'"
 164 ),
 165
 166 #if defined(CONFIG_CMD_LOADB)
 167 CMD_TBL_ITEM(
 168         loadb, 1, 0,    do_load_serial_bin,
 169         "load binary file over serial line (kermit mode)",
 170         "    - load binary file over serial line"
 171 ),
 172
 173 CMD_TBL_ITEM(
 174         loadx, 1, 0,    do_load_serial_bin,
 175         "load binary file over serial line (xmodem mode)",
 176         "    - load binary file over serial line"
 177 ),
 178
 179 CMD_TBL_ITEM(
 180         loady, 1, 0,    do_load_serial_bin,
 181         "load binary file over serial line (ymodem mode)",
 182         "    - load binary file over serial line"
 183 ),
 184 #endif  /* CONFIG_CMD_LOADB */
 185
 186 CMD_TBL_ITEM(
 187         go,     2,      0,      do_go,
 188         "start application at address 'addr'",
 189         "addr\n"
 190         "    - start application at address 'addr'"
 191 //      "\n"
 192 //      "      passing 'arg' as arguments"
 193 ),
 194 CMD_TBL_ITEM(
 195         reset,  1,      0,      do_reset,
 196         "Keep CPU in RESET state",
 197         ""
 198 ),
 199 CMD_TBL_ITEM(
 200         restart, 1, 1,  do_restart,
 201         "Perform RESET of the CPU",
 202         ""
 203 ),
 204 CMD_TBL_ITEM(
 205         connect, 1, 0,  do_console,
 206         "Connect to CPU console i/o",
 207         ""
 208 ),
 209
 210 CMD_TBL_ITEM(
 211         pin, CONFIG_SYS_MAXARGS, 1,     do_gpio,
 212         "Set or query pin state",
 213         "[-s] [<pins>]\n"
 214         "    - print cofiguration and state or frequency of pins\n"
 215         "      print all pins, if argument is omitted\n"
 216         "pin <pins> h[igh]|l[ow]\n"
 217         "    - config pins as output and set to level high or low\n"
 218         "pin <pins> ts|i[n]|p[ullup]\n"
 219         "    - config pins as input/tristate or input with pullup\n"
 220         "pin <pins> value[K|M][Hz]\n"
 221         "    - output a clock on pins\n"
 222         "      value is system clock divider or frequency, if 'Hz' is appended\n"
 223         "      divider is rounded down to next possible value (depends on pin)\n"
 224         "\n"
 225         "<pins> is a comma separated list of numbers or ranges, i.e. \"0,9,3-6\"\n"
 226 ),
 227
 228 CMD_TBL_ITEM(
 229         md,     3,      1,      do_mem_md,
 230         "memory display",
 231         "address [# of objects]"
 232 ),
 233 CMD_TBL_ITEM(
 234         mm,     2,      1,      do_mem_mm,
 235         "memory modify (auto-incrementing address)",
 236         "address"
 237 ),
 238 CMD_TBL_ITEM(
 239         nm,     2,      1,      do_mem_nm,
 240         "memory modify (constant address)",
 241         "address"
 242 ),
 243 CMD_TBL_ITEM(
 244         mw,     4,      1,      do_mem_mw,
 245         "memory write (fill)",
 246         "address value [count]"
 247 ),
 248 CMD_TBL_ITEM(
 249         cp,     4,      1,      do_mem_cp,
 250         "memory copy",
 251         "source target count"
 252 ),
 253 CMD_TBL_ITEM(
 254         cmp,    4,      1,      do_mem_cmp,
 255         "memory compare",
 256         "addr1 addr2 count"
 257 ),
 258 CMD_TBL_ITEM(
 259         base,   2,      0,      do_mem_base,
 260         "print or set address offset",
 261         "\n"
 262         "    - print address offset for memory commands\n"
 263         "base offset\n"
 264         "    - set address offset for memory commands to 'offset'"
 265 ),
 266 CMD_TBL_ITEM(
 267         mloop,  3,      1,      do_mem_loop,
 268         "infinite loop on address range",
 269         "address number_of_bytes"
 270 ),
 271 CMD_TBL_ITEM(
 272         mloopw, 4,      1,      do_mem_loopw,
 273         "infinite write loop on address range",
 274         "address number_of_bytes data_to_write"
 275 ),
 276
 277 #ifdef CONFIG_CMD_MEMTEST
 278 CMD_TBL_ITEM(
 279         mtest,  4,      1,      do_mem_mtest,
 280         "simple RAM read/write test",
 281         "[start [end [iterations]]]"
 282 ),
 283 #endif  /* CONFIG_CMD_MEMTEST */
 284
 285 #ifdef CONFIG_MX_CYCLIC
 286 CMD_TBL_ITEM(
 287         mdc,    4,      1,      do_mem_mdc,
 288         "memory display cyclic",
 289         "address count delay(ms)"
 290 ),
 291 CMD_TBL_ITEM(
 292         mwc,    4,      1,      do_mem_mdc,
 293         "memory write cyclic",
 294         "address value delay(ms)"
 295 ),
 296 #endif /* CONFIG_MX_CYCLIC */
 297
 298 CMD_TBL_ITEM(
 299         sd,   CONFIG_SYS_MAXARGS, 1, do_sd,
 300         "SD/MMC card handling commands",
 301         "<subcommand> args ...\n"
 302         "sd help\n"
 303         "    - print help on subcommands"
 304 ),
 305
 306 CMD_TBL_ITEM(
 307         fatstat,        2,      1,      do_fat_stat,
 308         "Show logical drive status",
 309         "dev"
 310 ),
 311 CMD_TBL_ITEM(
 312         fatls,  2,      1,      do_fat_ls,
 313         "Directory listing",
 314         "path"
 315 ),
 316 CMD_TBL_ITEM(
 317         fatload,        5,      0,      do_fat_rw,
 318         "load binary file from a dos filesystem",
 319         "<d:/path/filename> <addr> [bytes [pos]]\n"
 320         "    - Load binary file 'path/filename' on logical drive 'd'\n"
 321         "      to address 'addr' from dos filesystem.\n"
 322         "      'pos' gives the file position to start loading from.\n"
 323         "      If 'pos' is omitted, 0 is used. 'pos' requires 'bytes'.\n"
 324         "      'bytes' gives the size to load. If 'bytes' is 0 or omitted,\n"
 325         "      the load stops on end of file."
 326 ),
 327 CMD_TBL_ITEM(
 328         fatwrite,       4,      0,      do_fat_rw,
 329         "write file into a dos filesystem",
 330         "<d:/path/filename> <addr> <bytes>\n"
 331         "    - Write file to 'path/filename' on logical drive 'd' from RAM\n"
 332         "      starting at address 'addr'. 'bytes' gives the size to load.\n"
 333         "      If 'bytes' is 0 or omitted, the load stops on end of file."
 334 ),
 335
 336 CMD_TBL_ITEM(
 337         help,   CONFIG_SYS_MAXARGS,     1,      do_help,
 338         "print command description/usage",
 339         "\n"
 340         "       - print brief description of all commands\n"
 341         "help command ...\n"
 342         "       - print detailed usage of 'command'"
 343 ),
 344
 345 /* This does not use the CMD_TBL_ITEM macro as ? can't be used in symbol names */
 346         {FSTR("?"),   CONFIG_SYS_MAXARGS, 1, do_help,
 347          FSTR("alias for 'help'"),
 348 #ifdef  CONFIG_SYS_LONGHELP
 349         FSTR(""),
 350 #endif /* CONFIG_SYS_LONGHELP */
 351 #ifdef CONFIG_AUTO_COMPLETE
 352         0,
 353 #endif
 354 },
 355 /* Mark end of table */
 356 { 0 },
 357 };